S
Sephiroth
Guest
I'm building a trap, designed like this:
It's about a two to three story high tower with a panel on the top that's facing you after you climb the stairway/ramp.
The inside of the tower is hollow from top to bottom with two panels at the top that are controlled by wired hydraulics and set to resemble a floor.
When you press a button on the panel, it sets the hydraulics to 0, pulling the trap doors to the walls of the tower, thus dropping you into the tower and trapping you (with anti-noclip).
How could I set a timer so that after a couple seconds after pushing the button to open the trap doors, the hydraulic controllers are set back to 69 (original position) and close the opening?
Code:
|
|___
| |\
| | \
| | \
| | \
|___| \ x (You are here)
It's about a two to three story high tower with a panel on the top that's facing you after you climb the stairway/ramp.
The inside of the tower is hollow from top to bottom with two panels at the top that are controlled by wired hydraulics and set to resemble a floor.
When you press a button on the panel, it sets the hydraulics to 0, pulling the trap doors to the walls of the tower, thus dropping you into the tower and trapping you (with anti-noclip).
How could I set a timer so that after a couple seconds after pushing the button to open the trap doors, the hydraulic controllers are set back to 69 (original position) and close the opening?